Cylindrical Grinder

Manual and NC Grinder

Manual and NC Grinder

PDF

Feature

Sturdy rigid-designed workhead is electronically controlled giving variable spindle speeds ranging from 30-350RPM.

Cartridge type wheel spindle is equipped with four super precision class 7 (ABEC) bearings.

One V and one flat hand-scraped guideways on the weelhead are Turcite coated and incorporated with an automatic lubrication system, precision ballscrew, and A.C. servomotor (NC version only) to ensure smooth movement of the wheelhead which delivers longer way life with superior positioning accuracy and repeatability.

Slideways, ballscrew is continuously lubericated by an auto-lube system to ensure long service life and maintain maximum accuracy.

Conversational PLC control uses a menu-driven LCD touch screen that is easy to set. Simply fill in the blanks to set total grinding amount, rough increment, fine increment, spark-out passes, feeding direction, parking position and retracting clearance. Press cycle start complete the automatic grind cycle. (NC models only)

Automatic trim compensation.

Grinding Applications

Traverse grinding with 2-centers Support

Traverse grinding with 2-centers Support

Traverse Grinding with chuck

Traverse Grinding with chuck

Taper Grinding with Chuck

Taper Grinding with Chuck

Plunge grinding

Plunge grinding

Traverse grinding with 2-centers Support

Traverse grinding with 2-centers Support

Surface Grinding

Surface Grinding

Specification

Model G20P-50M/NC G25P-50M/NC G32P/G38P(M&NC)
60M/NC
G32P/G38P(M&NC)
100M/100NC
G32P/G38P(M&NC)
150M/150NC
G32P/G38P(M&NC)
200M/200NC
General capacity
Distance between Centers 500(20") mm(in) 500(20") mm(in) 600(24") mm(in) 1000(40") mm(in) 1500(60") mm(in) 2000(80") mm(in)
Swing over table (Ø8") mm(in) Ø260(Ø10.2") mm(in) 320/380 (12.6"/15") mm(in) 320/380 (12.6"/15") mm(in) 320/380 (12.6"/15") mm(in) 320/380 (12.6"/15") mm(in)
Max. grinding diameter (Ø8") mm(in) Ø250(Ø10") mm(in) 300/360 (12"/14") mm(in) 300/360 (12"/14") mm(in) 300/360 (12"/14") mm(in) 300/360 (12"/14") mm(in)
Max. Load held between centers 80(176) kg(lb) 80(176) kg(lb) 150(330) kg(lb) 150(330) kg(lb) 150(330) kg(lb) 150(330) kg(lb)
Wheelhead
Swivelling angle (R & L) Fixed ±30° mm(in) ±30° mm(in) ±30° mm(in) ±30° mm(in) ±30° mm(in)
Infeed travel 135(5.3") mm(in) 135(5.3") mm(in) 245(9.6") mm(in) 245(9.6") mm(in) 245(9.6") mm(in) 245(9.6") mm(in)
Hand feed travel 90(3.5") mm(in) 90(3.5") mm(in) 200(7.8") mm(in) 200(7.8") mm(in) 200(7.8") mm(in) 200(7.8") mm(in)
Top slide travel 180(7") mm(in) 180(7") mm(in) 180(7") mm(in) 180(7") mm(in) 180(7") mm(in) 180(7") mm(in)
Automatic rapid travel 45(1-3/4") mm(in) 45(1-3/4") mm(in) 45(1-3/4") mm(in) 45(1-3/4") mm(in) 45(1-3/4") mm(in) 45(1-3/4") mm(in)
Auto increment infeed (NC models) Ø0.001~Ø0.999(Ø0.001"~Ø0.0999") mm(in) Ø0.001~Ø0.999(Ø0.001"~Ø0.0999") mm(in) Ø0.001~Ø0.999(Ø0.001"~Ø0.0999") mm(in) Ø0.001~Ø0.999(Ø0.001"~Ø0.0999") mm(in) Ø0.001~Ø0.999(Ø0.001"~Ø0.0999") mm(in)
Handwheel per graduation Ø0.004(Ø0.0002") mm(in) Ø0.004(Ø0.0002") mm(in) Ø0.004(Ø0.0002") mm(in) Ø0.004(Ø0.0002") mm(in) Ø0.004(Ø0.0002") mm(in) Ø0.004(Ø0.0002") mm(in)
Handwheel per revolution Ø2(0.1") mm(in) Ø2(0.1") mm(in) Ø2(0.1") mm(in) Ø2(0.1") mm(in) Ø2(0.1") mm(in) Ø2(0.1") mm(in)
Grinding Wheel
Diameter x Width x Bore Ø355x38xØ127
(Ø14"x1"-1/2"xØ5") mm(in)
Ø355x38xØ127
(Ø16"x1"-1/2"xØ5") mm(in)
Ø405x50xØ127
(Ø16"x2"xØ5") mm(in)
Ø405x50xØ127
(Ø16"x2"xØ5") mm(in)
Ø405x50xØ127
(Ø16"x2"xØ5") mm(in)
Ø405x50xØ127
(Ø16"x2"xØ5") mm(in)
Wheel Speed 1750 rpm 1750 rpm 1650 rpm 1650 rpm 1650 rpm 1650 rpm
Table
Swivelling angle (R & L) degree ±8° ±8° ±9° ±7° ±5° ±3°
Traverse speed (infinitely variable) (3.0/5.5/9.0) mm(in/min) 30~7000 (1-1/5"~275") mm(in/min) 30~7000 (1-1/5"~275") mm(in/min) 30~7000 (1-1/5"~275") mm(in/min) 30~7000 (1-1/5"~275") mm(in/min) 30~7000 (1-1/5"~275") mm(in/min)
Handwheel per revolution 10(4") mm(in) 10(4") mm(in) 10(4") mm(in) 10(4") mm(in) 10(4") mm(in) 10(4") mm(in)
Workhead
Swivelling angle (R & L) degree ±45° ±45° 90° 90° 90° 90°
Center taper MT3 MT3 MT4 (opt. MT5, 5C) MT4 (opt. MT5, 5C) MT4 (opt. MT5, 5C) MT4 (opt. MT5, 5C)
Spindle speed (infinitely variable) 150/264/356/480 rpm 150/264/356/480 rpm 30~350 rpm 30~350 rpm 30~350 rpm 30~350 rpm
Tailstock
Center taper MT3 MT3 MT4 (opt. MT5) MT4 (opt. MT5) MT4 (opt. MT5) MT4 (opt. MT5)
Quill Travel 25(1") mm(in) 25(1") mm(in) 25(1") mm(in) 25(1") mm(in) 25(1") mm(in) 25(1") mm(in)
Internal Grinding
Internal Grinding
Spindle speed 25(1") rpm 25(1") rpm 25(1") rpm 25(1") rpm 25(1") rpm 25(1") rpm
Max. grinding bore 3-100(1.18"-3.94") or 20-50(0.79"-1.97") mm(in) 3-100(1.18"-3.94") or 20-50(0.79"-1.97") mm(in) 3-100(1.18"-3.94") or 20-50(0.79"-1.97") mm(in) 3-100(1.18"-3.94") or 20-50(0.79"-1.97") mm(in) 3-100(1.18"-3.94") or 20-50(0.79"-1.97") mm(in) 3-100(1.18"-3.94") or 20-50(0.79"-1.97") mm(in)
Max. grindind length 110(4.33") or 55(2.17") mm(in) 110(4.33") or 55(2.17") mm(in) 110(4.33") or 55(2.17") mm(in) 110(4.33") or 55(2.17") mm(in) 110(4.33") or 55(2.17") mm(in) 110(4.33") or 55(2.17") mm(in)
Max. chucking length 315(12-2/5") mm(in) 315(12-2/5") mm(in) 315(12-2/5") mm(in) 315(12-2/5") mm(in) 315(12-2/5") mm(in) 315(12-2/5") mm(in)
Max. chucking diameter 150(6") mm(in) 150(6") mm(in) 150(6") mm(in) 150(6") mm(in) 150(6") mm(in) 150(6") mm(in)
Motor
Wheel spindle Motor 5 HP 5 HP 7 1/2 HP 7 1/2 HP 7 1/2 HP 7 1/2 HP
Workhead Motor 1/2 HP 1/2 HP 2 HP 2 HP 2 HP 2 HP
Hydraulic pump 2 HP 2 HP 2 HP 2 HP 2 HP 2 HP
Coolant pump 1/8 HP 1/8 HP 1/4 HP 1/4 HP 1/4 HP 1/4 HP
Internal grinding motor 2 HP 2 HP 2 HP 2 HP 2 HP 2 HP
Machine
Net weight (approx) 2050(4510) kg(lb) 2050(4510) kg(lb) 3800(8580) kg(lb) 4700(10340) kg(lb) 5300(11660) kg(lb) 5700(12540) kg(lb)
Gross weight (approx) 2550(5610) kg(lb) 2550(5610) kg(lb) 4300(9460) kg(lb) 5200(11440) kg(lb) 5800(12760) kg(lb) 6600(14520) kg(lb)
Packing dimension (L x W x H) 2250x1650x1900
(89"x65"x75") mm(in)
2250x1650x1900
(89"x65"x75") mm(in)
3020x2300x2000
(119"x90"x79") mm(in)
3020x2300x2000
(119"x90"x79") mm(in)
4300x2300x2000
(170"x90"x79") mm(in)
5150x2300x2000
(203"x90"79") mm(in)

Accessories

Standard Accessories G20P/25
5C Lever Type Collet Closer (with 5C spindle)
Wheel Flange
Auto Lube
Manual Dressing Attachment
Wheel Extractor
Coolant System
Carbide Tip Centers MT3
Balancing Arbor
Tool Box w/Tools & Leveling Screws
Standard Accessories G32/38P
Wheel & Flange
Table Dial Gauge
Auto Lube System
Carbide Tip Centers MT4
Balancing Arbor
Coolant System
Splash Guard
Diamond Dresser (fixed on table)
Wheel Extractor
Tool Box w/Tools & Leveling Screws
Optional Accessories G20P/25
I.D Spindle Attachment
3 and 4-Jaw Scroll Chuck
Spare Wheel Flange
Balancing Stand
Fixed Back Plate
Coolant System w/Mag. Sep. & Paper Filter
Manual Leaver 5C Colser
Adjustable Back Plate
Coolant System w/Paper Filter
5C Collets
2-Point Steady Rest
Parallel Dressing Attachment (Manual)
3-Point Steady Rest
Digital Readout
Hydraulic Parallel Dressing Attachment (G25P)
Radius Dressing Device
Angle Dressing Device
Spare Grinding Wheel
Optional Accessories G32/38P
I.D Spindle Attachment
3 and 4-Jaw Scroll Chuck
Spare Wheel Flange
Balancing Stand
Fixed Back PlateCoolant System w/Mag. Sep. & Paper Filter
Manual Leaver 5C Colser
Coolant System w/Paper Filter
2-Point Steady Rest
Parallel Dressing Attachment (Manual)
3-Point Steady Rest
Over the Wheel Dresser with Auto Compensation
Digital Readout
Hydraulic Parallel Dressing Attachment
Radius Dressing Device
Angle Dressing Device
Spare Grinding Wheel

PROMOTIONS

PROMOTIONS