Please Chooese
Specification
ITEM | MODLE | S40 | M60 | L85 | L100 | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Working capacity | Max. swing over table | INCH | Ø15 | Ø23 Ø33 Ø39 | ||||||||||||
Max. distance between c.c. | FEET | 5FT | 10FT | 10FT | 13FT | 16.5FT | 20FT | 10FT | 13FT | 16.5FT | 20FT | |||||
Max. weight of workpiece | LB | 3300 | 8800 | 6000 | ||||||||||||
Max. O.D. ground | INCH | Ø15 Ø23 Ø33 Ø39 | ||||||||||||||
Rang of grinding dia. | INCH | Ø0-Ø15 | Ø0-Ø23 | Ø0-Ø33 | Ø0-Ø39 | |||||||||||
Wheelhead & Carriage (X axis) | Wheel size (O. D. x Width x Bore) | INCH | 20”x2”x6” | 36”x3”x12” | ||||||||||||
Type of lubricating system | – | Hydrostatic & dynamic system | ||||||||||||||
Rotating speed of wheel | R.P.M | 300-1800 | 300-1200 | |||||||||||||
Max. cross feed rate | INCH/ min | 39 | 78 | |||||||||||||
Cross feed per pulse | INCH | 0.00004 | ||||||||||||||
Table (Z axis) | Travel of table or head (Z axis) | INCH | Center Distance+8″ | |||||||||||||
Travel speed of table | INCH/ min | 0~118 | 0~236 | |||||||||||||
Type of lubricating systekm | – | Hydrostatic &dynamic system | ||||||||||||||
Workhead & Tailstock | Rotation speed of work head | R.P.M | 10-100 | 8-80 | 6-60 | |||||||||||
Size of center | – | MT#5 | MT#6 | |||||||||||||
Moving speed of tailstock | mm/ min | Manual | ||||||||||||||
Stroke of quill | INCH | 2 | 3 | |||||||||||||
Power rating | Grind wheel motor | HP | 10HPx6P | 20HPx6P | 30HPx6P | |||||||||||
Workhead motor | HP | 3HPx6P | 7.5HPx6P | 10HPx6P | ||||||||||||
Table traverse motor (Z axis) | HP | 12NM | 22NM | 30 NM | ||||||||||||
Tailstock move motor | HP | NON | ||||||||||||||
Cross feed motor (X axis) | HP | 8NM | 12NM | |||||||||||||
Lubricating system | HP | 2HP | ||||||||||||||
coolant system | Gal | 70 | 90 | 105 | 105 |
Accessories